Novell NETWARE 6-DOCUMENTATION Manual page 3564

SMSDI-X-273: An invalid destination location was specified.
Source:
Explanation:
Possible Cause:
Action:
SMSDI-X-274: Data from media is valid but error correction had to be used to read.
Source:
Explanation:
Action:
SMSDI-X-275: Media Manager reported a failure when attempting the requested read
or write operation.
Source:
Possible Cause:
Action:
SMSDI-X-276: The mediaHandle passed is invalid.
Source:
Possible Cause:
Action:
SMSDI-X-277: An attempt was made to label an already labeled media.
Source:
Explanation:
SMSDI.NLM
The medium was not written to correctly.
An internal error occurred in the program that Enhanced SBACKUP was
unable to handle.
Try again. If the problem persists, contact a Novell support provider.
SMSDI.NLM
The read or write operation was successful, but the device had to use its error
correction feature to recover the data.
Replace the device or medium as soon as possible.
SMSDI.NLM
The device or the media reported a hardware failure.
Replace the media or service the device.
SMSDI.NLM
The selected media is no longer valid or has changed.
Try selecting the media again by selecting the device under the Storage Device
Administration menu. If the problem persists, contact a Novell support
provider.
SMSDI.NLM
This alert is handled by Enhanced SBACKUP. The message informs the user
that a valid label already exists. This message is for information only.
SMSDI Messages 613