Novell NETWARE 6-DOCUMENTATION Manual page 3218

MAP-X-860: You are trying to login during an unauthorized time period. The
supervisor has limited the time period during which you can log in to this server.
Source:
Possible Cause:
Action:
MAP-X-870: An unknown error was returned during MAP's attempt to attach. (code)
Source:
Possible Cause:
Action:
MAP-X-890: The specified server is unknown.
Source:
Possible Cause:
Action:
MAP-X-903: The command line syntax is invalid. For help, type MAP /?
Source:
Action:
MAP-X-905: This utility was unable to initialize the country information.
Source:
Action:
MAP.EXE
The network supervisor has set specific time periods when the user can use the
server. The user cannot use the server until the next authorized time period.
Notify the user of the restricted time periods.
MAP.EXE
An error occurred that the operating system cannot identify. The error number
is identified by code. This usually indicates that the server is servicing the
maximum number of logged-in users it can accommodate with its memory.
Ask some users to log out. If the error persists, record the error value and
contact a Novell support provider. For information about a specific error code,
search the Error Codes online documentation (http://www.novell.com/
documentation/lg/nwec/docui/index.htm).
MAP.EXE
The user mistyped the name of the server, specified a server that is not on the
network, or specified a server that is down.
Using an applicable utility, such as NLIST or NetWare Adminisitrator, list the
servers that the station recognizes. Type the name of the server correctly. If the
server is down, try the command when the server has been brought back up.
If the problem persists, contact a Novell support provider.
MAP.EXE
See message "903: The command line syntax is invalid." on page 775
MAP.EXE
See message "905: This utility was unable to initialize the country
information." on page 775
MAP Messages 267