Novell NETWARE 6-DOCUMENTATION Manual page 3396

NWPA Messages
NWPA-X-004: The CDM driver deactivated device name due to a device failure.
Source:
Explanation:
Action:
NWPA-X-061: Ran out of Below16Meg buffers. Increase the reserve-number specified
in the STARTUP.NCF file.
Source:
Explanation:
Action:
The following includes messages from NWPA.NLM.
NWPA.NLM
The device specified in name was deactivated by the .cdm driver because the
device failed. The device is probably going bad or has already gone bad.
Try reactivating the device using monitor.nlm. If this does not work, try a
power-on reset. If the reset does not work, contact the manufacturer of the
device or adapter.
NWPA.NLM
The condition that issues this message is no cause for alarm, and it only
applies to 16-bit host adapters because of their 16 MB addressing limitation.
The message indicates that the server cannot allocate any new memory buffers
below 16 MB for I/O use. All I/O channels are still valid, but I/O performance
will decrease because the server must wait for existing buffers to recycle.
If the maximum has not already been specified, increase the value of the
Reserved Buffers Below 16 Meg parameter in the startup.ncf file.
NWPA Messages 445