Novell NETWARE 6-DOCUMENTATION Manual page 3643

4: Incorrect transport address format.
Source:
Possible Cause:
Action:
5: Illegal amount of data.
Source:
Action:
6: File descriptor does not refer to a transport endpoint.
Source:
Possible Cause:
Action:
7: Incorrect flags.
Source:
Action:
8: Incorrect transport options.
Source:
Possible Cause:
Action:
692 System Messages
TLI library
The application has called a function by passing an address that contains an
incorrect format or illegal information.
If you have access to developer documentation, look up the platform-specific
restrictions and options for the underlying protocol being used. Otherwise,
contact the developer or vendor of the application.
TLI library
If you have access to developer documentation, look up the platform-specific
restrictions for the minimum and maximum amount of data that can be sent.
Otherwise, contact the developer or vendor of the application.
TLI library
The file descriptor that was passed to the function is invalid or has not been
properly opened.
Contact the developer or vendor of the application.
TLI library
Contact the developer or vendor of the application.
TLI library
The user or application does not have permission to accept a connection on the
responding transport endpoint or to use the specified options.
Contact the developer or vendor of the application.