Novell NETWARE 6-DOCUMENTATION Manual page 3313

NWCONFIG-X-87: Warning: The disk cannot be locked because it is currently being
used by another process. A mounted volume may be using it. The partition table
cannot be modified at this time.
Source:
Explanation:
Action:
NWCONFIG-X-94: Overlapping disk segments were detected while free segments
were being added.
Source:
Explanation:
Action:
NWCONFIG-X-95: Abend: The GetVolumeNumber function was called with an
unmounted volume.
Source:
Explanation:
Action:
NWCONFIG-X-96: Abend: The program attempted to access FAT entry number, but
the highest FAT entry is number.
Source:
Explanation:
Action:
362 System Messages
NWCONFIG.NLM
The disk cannot be locked because it is currently being used by another
process. A mounted volume might be using it.
Wait to see if the process releases the device, then retry the action. If there is
a disk device error, unload NLM programs (except device drivers) that might
be using the disk. Then dismount volumes from the disk. If these efforts fail,
try loading MONITOR, deleting all user connections, and disabling logins.
NWCONFIG.NLM
An internal system error has occurred.
Try again. If the problem persists, contact a Novell support provider.
NWCONFIG.NLM
An internal system error has occurred. The installation process has terminated
prematurely, and NWCONFIG will be unloaded.
Try again. If the problem persists, contact a Novell support provider.
NWCONFIG.NLM
An internal system error has occurred. The installation process has terminated
prematurely, and NWCONFIG will be unloaded.
Try again. If the problem persists, contact a Novell support provider.