Novell NETWARE 6-DOCUMENTATION Manual page 3302

NWCONFIG-X-32: Volume information could not be written because NWCONFIG was
unable to lock disk label.
Source:
Explanation:
Action:
NWCONFIG-X-33: An error occurred (error code: code) while writing to disk label
sector number.
Source:
Explanation:
Action:
NWCONFIG-X-34: An attempt to expand the mounted volume tables failed. Error
code: code.
Source:
Explanation:
Action:
NWCONFIG-X-35: The program could not allocate memory for the volume FAT table.
Source:
Explanation:
Action:
NWCONFIG.NLM
The disk is probably being used by another process. A mounted volume might
be using it.
Wait to see if the process releases the device, then retry the action. If there is
a disk device error, unload NLM programs (except device drivers) that might
be using the disk. Then dismount volumes from the disk. If these efforts fail,
try loading MONITOR, deleting all user connections, and disabling logins.
NWCONFIG.NLM
The disk could not be written to. The driver or disk might not be configured
correctly, or a hardware failure might have occurred.
See Disk Errors in the
information about a specific error code, search the
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm).
NWCONFIG.NLM
NWCONFIG could not write to the disk or allocate memory to expand the
volume FAT and directory tables.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
information about a specific error code, search the
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm).
NWCONFIG.NLM
There is insufficient memory to accomplish the desired operation.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
Server Operating System Administration Guide. For
Error Codes online
Freeing Server Memory
Guide. For
Error Codes online
Freeing Server Memory
Guide.
NWCONFIG Messages 351