Novell NETWARE 6-DOCUMENTATION Manual page 3478

SBCON-X-221: The media name is invalid.
Source:
Possible Cause:
Action:
SBCON-X-224: The source slot is not reserved.
Source:
Possible Cause:
Action:
SBCON-X-266: Cannot delete an active job. If you want to terminate it, press Insert
and then Delete.
Source:
Possible Cause:
Action:
SBCON-X-295: Could not run
Source:
Possible Cause:
Action:
Action:
Action:
Action:
SBCON-X-303: No Target Service Agents were found on this server.
Source:
Possible Cause:
Action:
SBCON.NLM
The media name in the job file is not the same as the media loaded when the
job began.
Locate the correct media and insert it into the device. Retry the operation.
SBCON.NLM
The backup or restore source is missing. No medium exists in the location
where the medium needs to be moved.
Make sure the medium exists in the source slot. Retry the operation.
SBCON.NLM
You cannot delete a job that is being processed or that is running.
To terminate the job, press Insert in the job list menu, then press Delete in the
job activity screen.
SBCON.NLM
The submitted job could not be executed.
Check that the correct TSA is loaded.
For workstation TSAs, check that the TSA has registered to the correct
TSAProxy.
Check that the device is on, contains media, and the device drivers are loaded.
Load SMSDI.NLM after loading the device drivers.
SBCON.NLM
No TSAs have been loaded.
Load the appropriate TSA (TSA600.NLM, TSANDS.NLM,
TSADOSP.NLM, or GWTSA.NLM). Retry the operation. If the problem
persists, contact your Novell support provider.
SBCON Messages 527