Novell NETWARE 6-DOCUMENTATION Manual page 3351

Action:
NWCONFIG-X-309: No LAN driver files (*.LAN) were found at this path.
Source:
Explanation:
Action:
NWCONFIG-X-310: File name could not be saved to name.
Source:
Explanation:
Action:
NWCONFIG-X-311: File name could not be copied (error: description). Either the
driver file is not in the path specified or the destination path path is invalid.
Source:
Action:
NWCONFIG-X-312: Driver name is currently not loaded.
Source:
Action:
NWCONFIG-X-313: No other volumes exist.
Source:
Explanation:
Action:
400 System Messages
If the path points to a diskette drive, make sure that you are using the correct
diskette and that you have inserted it properly into the diskette drive.
Otherwise, specify the correct path to locate these files.
NWCONFIG.NLM
The indicated files were not found at this location.
If the path points to a diskette drive, make sure that you are using the correct
diskette and that you have inserted it properly into the diskette drive.
Otherwise, specify the correct path to locate these files.
NWCONFIG.NLM
NWCONFIG was unable to rename the current version of the file to the save
name. A file of that name already exists in the destination, and it cannot be
replaced.
Delete the file you tried to replace; then save the file you want to move or
rename.
NWCONFIG.NLM
Make sure that the path contains valid characters, points to a valid directory,
and contains the proper files.
NWCONFIG.NLM
Either load the driver or select another one, as appropriate.
NWCONFIG.NLM
No other volumes were found.
If you know other volumes exist, make sure that the disk containing these
volumes is powered on and that the appropriate disk driver is loaded and
visible to the server.