Novell NETWARE 6-DOCUMENTATION Manual page 3078

Action:
FILESYS-X-472: Volume already supports this Name Space.
Source:
Explanation:
FILESYS-X-475: Add name space aborted by the user.
Source:
Explanation:
FILESYS-X-477: Error reading directory on NameSpace upgrade...volume is left in a
bad state.
Source:
Explanation:
Possible Cause:
Action:
name spaces was marked as the originating name space. NetWare assumes that
the name was generated by the DOS name space.
Run VREPAIR and restart the system.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.
FILESYS.NLM
This status messate indicateds that the specified name space has already been
added to the volume. A volume can be configured only once for a specific type
of name space.
FILESYS.NLM
This status message indicates that after beginning installation of a name space,
the user opted to discontinue the operation.
FILESYS.NLM
This error occurred when an ADD NAME SPACE command was issued.
The error could indicate file system corruption.
Run VREPAIR with the Remove Name Space Support from the Volume
option.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.
FILESYS - File System Messages 127