Novell NETWARE 6-DOCUMENTATION Manual page 2788

Changing NLM Message Files
6
When you have finished selecting languages, press F10.
The system copies the selected language files.
7
Press Esc until the Other Installation Items/Products menu is displayed.
8
Select Change Server Language.
The screen displays a box containing the path from which you last
installed files.
9
Press Enter to accept the path.
The system displays a menu listing the available languages.
10
Select the desired language from the menu.
If this is the first time you have changed the language, the system displays
a prompt specifying the default destination where the language files are
to be placed. The location is the default boot directory, C:\NWSERVER.
The language files must be placed in your boot directory.
11
Accept the default or type the path to your boot directory.
After you specify the boot directory, the system loads the language files.
12
Restart the server for the change to take effect.
To change the language for subsequently loaded NLM programs, use the
LANGUAGE command at the System Console prompt. The LANGUAGE
command does not change the language for currently loaded modules.
IMPORTANT:
If you change the NLM language without changing the server
language, the NLM still displays some character strings and screen titles in the
server language. For consistent language display, you should also change the
server language as explained in the section,
page 30.
1
At the System Console prompt, enter
LANGUAGE LIST
The server displays a list of languages and their ID numbers. Not all
languages in the list are currently supported.
2
Note the name or number of the language you want to use.
3
At the System Console prompt, enter
LANGUAGE Language_name |number
"Changing Server Message Files" on
Setting Up the NetWare Server
31