Novell NETWARE 6-DOCUMENTATION Manual page 3162

LANSUP-DOS Messages
LANSUP-DOS-X-001: The LSL is not loaded.
Source:
Explanation:
Action:
LANSUP-DOS-X-002: The LSL has no room for a board using frame type.
Source:
Explanation:
Action:
The following includes messages from LADSUP.COM.
LANSUP.COM
The computer must load the Link Support Layer (LSL) before loading the
driver.
Load the LSL; then load the driver, as in the following example:
C:\NWCLIENT\LSL <Enter>
C:\NWCLIENT\LANSUP <Enter>
LANSUP.COM
The Link Support Layer (LSL) is configured with resources for a set number
of network boards. (The default is 4.) This number has been exceeded.
Edit the NET.CFG file, and add the MAX BOARDS keyword to reflect the
number of network boards to be loaded, as in the following example:
LINK SUPPORT
MAX BOARDS 6
Unload the driver; then reload it as in the following example:
C:\NWCLIENT\LANSUP /u <Enter>
C:\NWCLIENT\LANSUP <Enter>
LANSUP-DOS Messages 211