Novell NETWARE 6-DOCUMENTATION Manual page 3450

RCONPRXY Messages
RCONPRXY: ERROR Cannot connect the Agent transport endpoint.
Source:
Possible Cause:
Action:
RCONPRXY: ERROR Cannot get IP nor IPX address for `SERVER'.
Source:
Possible Cause:
Action:
RCONPRXY: ERROR Cannot open the Agent transport endpoint.
Source:
Possible Cause:
Action:
The following includes messages from RCONPRXY.NLM.
RCONPRXY.NLM
The RCONAG6 on the target server is not listening on the address specified
in the message.
Verify the port number being used by RCONAG6 on the target server.
RCONPRXY.NLM
The RConsoleJ client is requesting a connection to a target server named
`SERVER' which cannot be found.
Verify the port number being used by the RCONAG6 NLM loaded on the
target server.
RCONPRXY.NLM
The SPXS NLM is not loaded on a NetWare 3 or NetWare 4 server.
Load the SPXS NLM on all NetWare 3 or NetWare 4 servers as explained in
Loading the RConsoleJ Agent
Guide.
in the Server Operating System Administration
RCONPRXY Messages 499