Novell NETWARE 6-DOCUMENTATION Manual page 3317

NWCONFIG-X-111: This product cannot be removed.
Source:
Explanation:
Action:
NWCONFIG-X-113: File name cannot be written to. One of the following problems may
exist: (1) The target disk is full. (2) The disk is write-protected.
Source:
Action:
NWCONFIG-X-114: File name cannot be created. One of the following problems may
exist: (1) The disk is full. (2) The disk is write-protected. (3) The path specification is
invalid.
Source:
Action:
NWCONFIG-X-115: The operation aborted because BTRIEVE.NLM could not be
accessed.
Source:
Explanation:
Action:
NWCONFIG-X-116: Warning: The volume will be deleted and all its contents lost if you
indicate Yes in the Confirm box that follows this message.
Source:
Explanation:
Action:
366 System Messages
NWCONFIG.NLM
The nature of the product prevents it from being removed.
Do not try to remove this product.
NWCONFIG.NLM
Insert a disk with more free space on it. If the disk is write-protected, remove
the write protection.
NWCONFIG.NLM
Insert a disk with more free space on it. If the disk is write-protected, remove
the write protection, or specify a different path.
NWCONFIG.NLM
Although BTRIEVE.NLM is loaded, Btrieve could not be accessed. The
installation process has terminated prematurely, and NWCONFIG will be
unloaded.
Make sure that the version of BTRIEVE.NLM is compatible with the NetWare
version of NWCONFIG. Unload and reload BTRIEVE.NLM to see if the
problem persists. If the problem persists, contact a Novell support provider.
NWCONFIG.NLM
As indicated, this is a warning message.
Select Yes only to delete the volume.