Novell NETWARE 6-DOCUMENTATION Manual page 3473

SBCON-X-175: Scheduling not enabled
Source:
Possible Cause:
Action:
Action:
Action:
SBCON-X-178: The job is no longer in the queue.
Source:
Possible Cause:
Action:
SBCON-X-183: Status report error: error_number
Source:
Possible Cause:
Action:
SBCON-X-193: Do you want to abort this session?
Source:
Possible Cause:
Action:
SBCON-X-196: Alert Handler can't allocate the resource_tag_name resource tag.
Source:
Possible Cause:
Action:
522 System Messages
SBCON.NLM
The scheduling information for the job is corrupted or it is wrong. Perhaps
other applications have tried to submit a job to the job queue.
Make sure the job queue is being used by Enhanced SBACKUP only.
If the job file is corrupted, enter the scheduling information again, but
unexpected results might occur.
Delete the job and try again.
SBCON.NLM
While the job was being executed, the job was deleted using NetWare
Administrator.
Do not use NetWare Administrator to access SMS job queues.
SBCON.NLM
An internal error has occurred.
Report the error message and number to your Novell support provider.
SBCON.NLM
You pressed Delete while displaying the active job's runtime status in the Job
Administration menu.
Select Yes if you want to stop the job; otherwise, select No and the job will
continue to run.
SBCON.NLM
The server is out of memory.
Unload SBCON.NLM and QMAN.NLM Reduce the transfer buffer size in the
configuration file, SYS:\ETC\SMS\SBACKUP.CFG, then reload
QMAN.NLM and SBCON.NLM again. If the problem persists, upgrade the
server memory and try again.