Novell NETWARE 6-DOCUMENTATION Manual page 2735

Statistics
Transmit failed, lost frame
Error tokens transmitted
Upstream node address
Last ring ID
Last beacon type
Table 26
Statistic
Configuration State
Upstream Node Address
Downstream Node Address
Receive failed, frame error
Receive failed, lost frame
Ring Management State
Consecutive LCT failures
Description
This counter is incremented when a ring station transmits a frame
that does not return to the station.
The active monitor sends a new token.
This counter is incremented when a station acting as the active
monitor recognizes an error condition that needs a token
transmitted.
This occurs when the TVX time expires.
The twelve digits of the upstream node address of the next node
up stream on the ring.
This contains the value of the local ring ID.
This contains the value of the last beacon type.
Generic Statistics for FDDI Drivers That Use Fdditsm.nlm
Description
The attachment configuration for the station or concentrator:
0=isolated; 1=local_a; 2=local_b; 3=local_ab; 4=local_s;
5=wrap_a; 6=wrap_b; 7=wrap_ab; 8=wrap_s; 9=c_wrap_a;
10=c_wrap_b; 11=c_wrap_s; 12=thru
The upstream neighbor's MAC address (0 if unknown).
The downstream neighbor's MAC address (0 if unknown).
The number of frames that were detected in error by this MAC
that had not been detected in error by another MAC.
The number of instances that this MAC detected a format error
during frame reception such that the frame was stripped.
Indicates the current state of the Ring Management state
machine:
0=Isolated; 1=Non_Op; 2=Ring_Op; 3=Detect; 4=Non_Op_Dup;
5=Ring_Op_Dup; 6=Directed; 7=Trace
The count of the consecutive times the link confidence test (LCT)
has failed during connection management.
LAN Driver Statistics 297