Novell NETWARE 6-DOCUMENTATION Manual page 3594

38: The bindery is locked. Normally the bindery is only locked if the supervisor is
backing up volume SYS:. No information can be obtained until the supervisor unlocks
the bindery.
Source:
Explanation:
Action:
39: Server name does not respond.
Source:
Possible Cause:
Action:
Possible Cause:
Action:
40: Server name is not connected.
Source:
Possible Cause:
Action:
41: Your station is already attached to the maximum number of servers allowed. You
must detach from at least one server before you can attach to server name.
Source:
Possible Cause:
Action:
42: Server name does not have any free connection slots. Another user must detach
from it before you can attach to it.
Source:
Explanation:
Action:
utility name in message prefix
This is a temporary inconvenience.
Wait a few minutes and try again.
utility name in message prefix
The user is not attached to the server.
Make sure the user is attached to the server, and try again.
The server is down or malfunctioning.
Make sure the server is running and functioning properly.
utility name in message prefix
The most likely cause is that the workstation is not attached to this server. This
could be a cabling problem.
Check the cabling, or make sure the workstation is attached to the server, and
try again.
utility name in message prefix
The user has tried to attach to more servers than the user is allowed to.
Detach from at least one server before attempting to attach to the new server.
utility name in message prefix
The server indicated in the message does not have any free connection slots.
Make sure another user detaches from the server before this user attempts to
attach to it.
TEXTUTIL-utility_name 643