Novell NETWARE 6-DOCUMENTATION Manual page 3291

NSS-X-1408: Error adding a purge log Entry, possibly due to MEDIA Errors.
Source:
Explanation:
Possible Cause:
Possible Cause:
Action:
NSS-X-1429: Unable to initialize authentication information on the root directory of
the volume volume_name, status=error code.
Source:
Explanation:
Possible Cause:
Action:
NSS-X-1437: Failed to queue a Read Request at volume block: volume_number file
block: file_number on Volume volume_name.
Source:
Explanation:
Possible Cause:
Action:
NSS-X-1438: Failed to queue a Read Request at volume block: volume_number file
block: file_number on Volume volume_name.
Source:
Explanation:
Possible Cause:
Action:
340 System Messages
ZLSS.NSS
An entry could not be added to the purge log file.
The hard disk might be full.
You might have a bad sector on your hard disk.
Check your hard disk. Retry the operation. If the problem persists, contact
your Novell support provider.
ZLSS.NSS
NSS tried to create an NSS volume.
An internal error has occurred.
Retry the operation. If the problem persists, contact your Novell support
provider.
ZLSS.NSS
NSS temporarily has no resources available, such as memory.
An internal error has occurred.
Retry the operation. If this is a write error, you may have to mount the volume.
If this is a read error, you do not have to mount the volume. If the problem
persists, contact your Novell support provider.
ZLSS.NSS
NSS temporarily has no resources available, such as memory.
An internal error has occurred.
Retry the operation. If this is a write error, you may have to mount the volume.
If this is a read error, you do not have to mount the volume. If the problem
persists, contact your Novell support provider.