Novell NETWARE 6-DOCUMENTATION Manual page 3324

154: No accessible drives have NetWare partitions. Proceeding to locate NSS
volumes.
Source:
Explanation:
Action:
156: Volume name already exists. Try another name.
Source:
Explanation:
Action:
NWCONFIG-X-157: Volume name cannot be created.
Source:
Explanation:
Action:
NWCONFIG-X-158: The segment link cannot be located.
Source:
Explanation:
Action:
NWCONFIG-X-159: Warning: Volume name has multiple sync entries. It cannot be
deleted at this time.
Source:
Explanation:
Action:
NWCONFIG.NLM
The installation program cannot find a NetWare disk partition.
If no disk partitions have been created, make one.
NWCONFIG.NLM
A volume name was entered that is already defined on the server.
Use a unique volume name.
NWCONFIG.NLM
An error probably occurred while allocating memory, or an error occurred
while accessing the disk.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
NWCONFIG.NLM
An internal system error has occurred.
Contact a Novell support provider.
NWCONFIG.NLM
Multiple disk devices are online that contain volumes with the name shown in
the message.
Bring the disks that contain these volumes online one at a time, rather than at
the same time. If one of the volumes is old and no longer needed, delete it to
avoid the problem in the future. Two volumes on the same server cannot have
the same name.
Freeing Server Memory
Guide.
NWCONFIG Messages 373