Novell NETWARE 6-DOCUMENTATION Manual page 3237

NDPSM-X-251: Error <code> occurred registering public access printer <printer> with
the Service Registry Service.
Source:
Possible Cause:
Action:
NDPSM-X-265: Error <code> occurred while initializing the user interface.
Source:
Possible Cause:
Action:
NDPSM-X-266: An error occurred while creating the key line. This is usually due to a
low memory condition.
Source:
Action:
NDPSM-X-267: An error occurred while creating the information portal. This is usually
due to low memory condition.
Source:
Action:
286 System Messages
NDPSM.NLM
An internal error stopped the NDPS Manager from registering the printer. This
could be a problem in the program itself.
For information about the specific error code, search the
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm). If you are unable to resolve the error, contact your Novell support
provider.
NDPSM.NLM
An internal error stopped the NDPS Manager from initializing the interface.
This could be a problem in the program itself.
For information about the specific error code, search the
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm). If you are unable to resolve the error, contact your Novell support
provider.
NDPSM.NLM
Make sure the server has sufficient memory, then retry the operation. For
information on resolving memory problems, see
Temporarily in the Server Operating System Administration
NDPSM.NLM
Make sure the server has sufficient memory, then retry the operation. For
information on resolving memory problems, see
Temporarily in the Server Operating System Administration
Error Codes online
Error Codes online
Freeing Server Memory
Guide.
Freeing Server Memory
Guide.