Novell NETWARE 6-DOCUMENTATION Manual page 3428

PSERVER-X-18: There is insufficient memory for the print server to add an additional
printer.
Source:
Possible Cause:
Action:
PSERVER-X-19: The program cannot create client service processes.
Source:
Possible Cause:
Action:
PSERVER-X-20: All send buffers have been consumed.
Source:
Possible Cause:
Action:
PSERVER-X-26: The program cannot create the down monitor process.
Source:
Possible Cause:
Action:
PSERVER-X-28: A bad process ID was passed to the kernel.
Source:
Possible Cause:
Action:
PSERVER.NLM
The print server does not have enough available memory for another printer.
Increase the memory available at the server. See
Temporarily in the Server Operating System Administration
PSERVER.NLM
The print server might not have enough available memory to initialize.
Increase the memory available at the server. See
Temporarily in the Server Operating System Administration
PSERVER.NLM
A network communications error occurred, causing all the print server
communication buffers to be consumed without being freed.
Until you can locate the communication problem, unload and reload the print
server to reinitialize its communication buffers.
PSERVER.NLM
The print server might not have enough available memory to initialize.
Increase the memory available at the server. See
Temporarily in the Server Operating System Administration
PSERVER.NLM
An internal print server error occurred.
Until you can locate the problem, unload and reload the print server to
reinitialize its communication buffers.
Freeing Server Memory
Guide.
Freeing Server Memory
Guide.
Freeing Server Memory
Guide.
PSERVER Messages 477