Novell NETWARE 6-DOCUMENTATION Manual page 3040

Action:
Possible Cause:
Action:
DSREPAIR-x-043: Unable to create an NWSNUT portal.
Source:
Explanation:
Action:
DSREPAIR-x-044: Could not read from file: name, offset number. Record will be
padded with 0's.
Source:
Explanation:
Action:
DSREPAIR-x-045: Could not gain access to Directory Services. Another NLM has
already registered with DS. This could be one of DSI.NLM, DSMERGE.NLM or
DSREPAIR.NLM.
Source:
Explanation:
Action:
Try the operation again. If the error persists, contact a Novell support provider.
The server has insufficient memory.
Increase the available memory to the server. See
Temporarily in the Server Operating System Administration
operation again. If the server has at least 500 KB of free memory, contact a
Novell support provider.
DSREPAIR.NLM
The server might be out of memory.
Increase the available memory to the server. See
Temporarily in the Server Operating System Administration
operation again.
DSREPAIR.NLM
DSREPAIR could not read a record from the eDirectory database; however,
rather than aborting the repair, the record is filled with 0's and the repair
operation will continue.
No further action is required.
DSREPAIR.NLM
Only one of the three described NLM programs can be loaded at a time.
Check to see if one of these NLM programs are loaded and unload it. If that
does not resolve the problem, bring down the server and bring it back up. Then
retry the operation.
Freeing Server Memory
Guide. Try the
Freeing Server Memory
Guide. Try the
DSREPAIR Messages
89