Novell NETWARE 6-DOCUMENTATION Manual page 3446

RConsoleJ Messages
Cannot Connect to...
Possible Cause:
Action:
Action:
Connected to a proxy at...
Possible Cause:
Action:
Connection failed
Possible Cause:
Action:
This section explains the following error messages you might encounter using
the Remote Console utility (RConsoleJ) and the actions to take:
"Cannot Connect to..." on page 495
"Connected to a proxy at..." on page 495
"Connection failed" on page 495
"Not a proxy at..." on page 496
"Unknown host" on page 496
RConsoleJ cannot connect to the target or the proxy server indicated in this
message.
Enter the correct port number and try again.
Reload the target or proxy server NLM
The server, whose IP address or the DNS name was entered in the Agent
Address field, is functioning as a proxy server only.
Check if the NLM on the given port number of the server is RCONPRXY. If
so, change it to RCONAG6.NLM.
The server, whose IP address or the DNS name was entered in the Agent
Address field, is not responding.
Ensure that RCONAG6.NLM is loaded on the server.
with the required port number.
TM
RConsoleJ Messages 495