Novell NETWARE 6-DOCUMENTATION Manual page 3322

NWCONFIG-X-142: No NetWare partitions are on this CD-ROM device.
Source:
Explanation:
Action:
NWCONFIG-X-144: File name cannot be unpacked. Error: description.
Source:
Explanation:
Action:
NWCONFIG-X-145: Four disk partitions are already on this drive.
Source:
Explanation:
Action:
NWCONFIG-X-146: No NetWare disk partitions (post-NetWare 286 partitions) are on
this drive. Create one before continuing.
Source:
Explanation:
Action:
NWCONFIG.NLM
A CD-ROM device does not have a NetWare disk partition.
The installation program will not show the disk partition table of a CD-ROM
device which has no NetWare partition. Select a different device.
NWCONFIG.NLM
This error could result from inadequate disk space, from I/O errors, or from
file corruption.
Do one or both of the following:
See Resolving Volume I/O Errors
Administration
Get a new distribution diskette, if available.
If the problem persists, contact a Novell support provider.
NWCONFIG.NLM
A partition table was designed to have only four entries. You are trying to
define a fifth entry in the partition table.
Determine which three disk partitions are the most important and delete all
others. Retry the action.
NWCONFIG.NLM
The user is trying to edit a partition table that does not contain a NetWare 3.x
or NetWare 4.x disk partition.
Use ConsoleOne to create a partition.
in the
Guide.
Traditional File Services
NWCONFIG Messages 371