Novell NETWARE 6-DOCUMENTATION Manual page 2664

Parameter
SLP Event Timeout = value
SLP DA Heart Beat Time = value
SLP Close Idle TCP Connections
Time = value
SLP DA Event Timeout = value
Time Parameters
226 Utilities Reference
Use to
Specify an integer value describing the number of seconds to wait
before timing out multicast packet requests.
Supported values: 0 to 4294967255
Default: 53
This parameter can be set in the STARTUP.NCF file.
Specify an integer value describing the number of seconds before
sending the next Directory Agent heartbeat packet.
Supported values: 0 to 4294967255
Default: 10800
This parameter can be set in the STARTUP.NCF file.
Specify an integer value describing the number of seconds before
idle TCP connections should be terminated.
Supported values: 0 to 4294967255
Default: 300
This parameter can be set in the STARTUP.NCF file.
Specify an integer value describing the number of seconds to wait
before timing out Directory Agent packet requests.
Supported values: 0 to 429
Default: 5
This parameter can be set in the STARTUP.NCF file.
Time parameters control time synchronization, the TIMESYNC.CFG file, and
time zone settings to ensure that the time reported by all servers is consistent,
or synchronized. For more information, see the
Administration Guide.
For a description of time parameters, see
Network Time Management
Table 15 on page 227.