Novell NETWARE 6-DOCUMENTATION Manual page 2653

Parameter
Display Relinquish Control Alerts =
value
Halt System on Invalid Parameters =
value
Worker Thread Execute In a Row
Count = number
Use to
Control whether messages about processor control are sent to
the server console. This parameter can be used as a debugging
tool.
Supported values:
ON = Use if you're writing your own loadable modules.
OFF = Use if you're not writing your own loadable modules.
Default: OFF
If a module uses the processor for more than 0.4 second without
relinquishing control to other processes, the following types of
messages appear:
process_name Process did not relinquish control frequently.
Module: module_name
Code offset in module: memory_address
You can set this parameter in the STARTUP.NCF file.
Specify whether to stop the system when invalid parameters are
detected.
Supported values: ON, OFF
Default: OFF
ON = You want the system to halt when an invalid parameter or
condition is detected.
OFF = You want the system to display an alert and continue
running when an invalid parameter or condition is detected.
You can set this parameter in the STARTUP.NCF file.
Specify the number of times the scheduler consecutively
dispatches new work before allowing other threads to run.
Supported values: 1 to 20
Default: 10
Worker threads are created by the kernel to perform work for the
kernel itself.
Utilities 215