Novell NETWARE 6-DOCUMENTATION Manual page 3404

NWSNUT-X-47: This NLM contains no messages.
Source:
Possible Cause:
Action:
NWSNUT-X-48: An invalid resource tag was passed to the NUT initialization
procedure.
Source:
Possible Cause:
Action:
Action:
NWSNUT-X-49: The NUT compatibility NLM (NUTCOMP) could not be loaded.
Source:
Possible Cause:
Action:
NWSNUT.NLM
The calling NLM passed a NULL to NUT for the messageTable parameter.
However, the calling NLM did not have any messages linked into it. This must
be done with the messages parameter to NLMLINKP or NLMLINKR.
The calling NLM program must pass a valid message table pointer, or it must
have messages linked in properly.
NWSNUT.NLM
This is an error within the calling NLM program. The values passed to this
NUT call were incorrect.
If purchased software displays this error, contact the supplier of the software.
If you are a developer, review the documentation for this function and modify
the program accordingly.
NWSNUT.NLM
NUT was unable to locate the NUTCOMP.NLM module. This NLM program
is required to support NLM programs that use the NetWare 3.x or later NUT
interface.
Copy the NUTCOMP.NLM module to the SYS:SYSTEM directory.
NWSNUT Messages 453