Novell NETWARE 6-DOCUMENTATION Manual page 3318

NWCONFIG-X-117: A memory corruption problem has occurred. Program operation
cannot continue.
Source:
Explanation:
Action:
NWCONFIG-X-118: An attempt to free unallocated memory has failed. Program
operation cannot continue.
Source:
Explanation:
Action:
NWCONFIG-X-121: The Wait message is too large to be displayed.
Source:
Explanation:
Action:
NWCONFIG-X-124: Warning: The disk partition cannot be locked because it is
currently being used by another process. A mounted volume may be using it. The
partition cannot be modified at this time.
Source:
Action:
NWCONFIG-X-126: The option failed.
Source:
Explanation:
Action:
NWCONFIG.NLM
An internal system error has occurred. The installation process has terminated
prematurely, and NWCONFIG will be unloaded.
Try again. If the problem persists, contact a Novell support provider.
NWCONFIG.NLM
An internal system error has occurred. The installation process has terminated
prematurely, and NWCONFIG will be unloaded.
Try again. If the problem persists, contact a Novell support provider.
NWCONFIG.NLM
An internal system error has occurred.
Try again. If the problem persists, contact a Novell support provider.
NWCONFIG.NLM
Wait to see if the process releases the device, then retry the action. If there is
a disk device error, unload NLM programs (except device drivers) that might
be using the disk. Then dismount volumes from the disk. If these efforts fail,
try loading MONITOR, deleting all user connections, and disabling logins.
NWCONFIG.NLM
This is an internal error probably caused by insufficient memory.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
Freeing Server Memory
Guide.
NWCONFIG Messages 367