Novell NETWARE 6-DOCUMENTATION Manual page 3507

SERVER-X-1401: Invalid resource tag passed to ParseDriverParameters.
Source:
Possible Cause:
Action:
SERVER-X-1512: Invalid load file format.
Source:
Explanation:
Possible Cause:
Action:
SERVER-X-1514: Invalid procedure offsets within load file.
Source:
Explanation:
Action:
SERVER-X-1532: Device_name deactivated for unknown reason.
Source:
Possible Cause:
Action:
SERVER-X-1533: Device name deactivated due to driver unload.
Source:
Explanation:
556 System Messages
SERVER.EXE
An NLM tried to register a driver parameter, but the module did not create a
resource tag for the process.
Contact the vendor for an updated version of the NLM.
SERVER.EXE
When you tried to load a module, the server did not recognize the module as
an NLM.
The module may be corrupted or it may not be an NLM.
If possible, try loading a different copy of the module or contact the module
vendor.
SERVER.EXE
Values within the load file header for a particular NLM were not what the
system expected. The items in question include the initialization offset, code
image length, exit procedure offset, and check unload procedure offset.
This error indicates a corrupted NLM or a faulty disk system. Reload the NLM
from the master CD-ROM or diskette, and check the disk system for potential
problems.
SERVER.EXE
A hardware error probably occurred which deactivated the drive.
See Disk Errors in the
SERVER.EXE
This status message indicates that the drive was deactivated because the driver
was unloaded.
Server Operating System Administration Guide.