Novell NETWARE 6-DOCUMENTATION Manual page 3033

DSREPAIR-x-017: Cannot initialize directory path to Directory Services files.
Source:
Possible Cause:
Action:
DSREPAIR-x-018: Could not rename file: old_filename.
Source:
Possible Cause:
Action:
Action:
Action:
Action:
Action:
DSREPAIR-x-019: Could not read from file: filename, offset: offset.
Source:
Explanation:
Action:
Action:
Action:
DSREPAIR-x-020: Could not read entry of name: local_name.
Source:
Explanation:
Action:
82
System Messages
DSREPAIR.NLM
DSREPAIR could not find the directory that contains the eDirectory database
files in volume SYS:.
Make sure volume SYS: is mounted, or run reinstall the server.
DSREPAIR.NLM
A file of the same name might already exist.
Run DSREPAIR again.
If necessary, rebuild the volume using REBUILD (NSS Logical volume) or
VREPAIR (Traditional volume), and then running DSREPAIR again.
Then try unloading and reloading eDirectory.
If these actions do not work, reboot the server and try again.
Your final option is to reinstall the server. If the problem persists, contact a
®
Novell support provider.
DSREPAIR.NLM
DSREPAIR could not read a record from the eDirectory database.
Try rebuilding the volume using REBUILD (NSS Logical volume) or
VREPAIR (Traditional volume) then running DSREPAIR again. Then try
unloading and reloading eDirectory.
If these actions do not work, reboot the server and try again.
A final option is to reinstall the server. If the problem persists, contact a Novell
support provider.
DSREPAIR.NLM
DSREPAIR could not read a record from the eDirectory database.
Try rebuilding the volume using REBUILD (NSS Logical volume) or
VREPAIR (Traditional volume and run DSREPAIR again. Then unload and
reload eDirectory.