Novell NETWARE 6-DOCUMENTATION Manual page 2702

TIMESYNC
Purpose
Syntax
264 Utilities Reference
Figure 2 TIME Output
Use at the server console to monitor the internal time on a server to ensure that
the time reported by all servers across the network is consistent, or
synchronized.
TIMESYNC autoloads when the server boots. Under very few circumstances
will you ever load or unload TIMESYNC. You may, however, want to load
TIMESYNC to use an alternate configuration (.CFG) file.
[LOAD] [path] TIMESYNC
Parameter
path
You can set TIMESYNC parameters in the configuration file
(TIMESYNC.CFG) or with the SET utility.
Use to
Specify the path to TIMESYNC.NLM if you
moved it from the default directory.