Novell NETWARE 6-DOCUMENTATION Manual page 3503

SERVER-X-1229: Unsupported frame type setting ignored.
Source:
Explanation:
Possible Cause:
Action:
SERVER-X-1278: QueueEventReport failed to allocate memory.
Source:
Explanation:
Action:
SERVER-X-1301, 1302, 1305, 1306: Error reading filename.
Source:
Explanation:
Action:
SERVER-X-1307: Invalid packed NLM filename.
Source:
Possible Cause:
Action:
SERVER-X-1308: Unable to allocate memory for NLM unpacking.
Source:
Explanation:
Possible Cause:
Action:
552 System Messages
SERVER.EXE
A specified frame type was ignored when the LAN driver was loaded.
The LAN driver might not support the frame type or the frame type might
already be loaded.
If necessary, replace the driver with one that does support the specified frame
type.
SERVER.EXE
The server is low on memory.
Unload unnecessary modules or add more memory.
SERVER.EXE
The file could be locked or it could be corrupted.
If another user is using the file, wait until the file is unlocked. If the file is not
locked, it might be corrupted. Try restoring the file from a backup.
SERVER.EXE
An NLM program that is not a File System Engine NLM is too large to be
loaded. Four megabytes is the maximum size allowed.
Do not try to load that NLM program.
SERVER.EXE
The operating system was unable to allocate memory for unpacking the NLM.
The operating system is out of memory.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
Freeing Server Memory
Guide.