Novell NETWARE 6-DOCUMENTATION Manual page 3099

FILESYS-X-662: TTS disabled because of error growing TTS memory tables.
Source:
Possible Cause:
Action:
FILESYS-X-663: TTS disabled because of error allocating more disk space for the
backout file.
Source:
Possible Cause:
Action:
FILESYS-X-664: TTS disabled because of directory error on TTS backout file.
Source:
Possible Cause:
Action:
FILESYS-X-666: TTS cannot allocate sufficient memory.
Source:
Possible Cause:
Action:
FILESYS-X-667: Error renaming old TTS backout file.
Source:
Possible Cause:
Action:
148 System Messages
FILESYS.NLM
The server does not have enough memory.
See Resolving Server Memory Problems
Administration Guide.
FILESYS.NLM
The backout volume is full.
Try adding another drive to the backout volume, deleting or compressing
existing files on the backout volume, or moving files from the backout volume
to another volume. (Increasing disk space on volumes other than the backout
volume will not help.)
FILESYS.NLM
There is not enough space available on the volume for the directory.
Increase the percentage of volume space that can be used by the directory.
FILESYS.NLM
The server does not have enough memory.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
FILESYS.NLM
A hardware error occurred.
See Disk Errors in the
in the
Server Operating System Administration
Server Operating System
Freeing Server Memory
Guide.
Guide.