Novell NETWARE 6-DOCUMENTATION Manual page 3624

THREADS Messages
THREADS-X-018: THREADS is unable to set up its branch table. There may not be
enough server memory, or server memory may be corrupted.
Source:
Explanation:
Possible Cause:
Action:
THREADS-X-020: An internal Semaphore Timer error has occurred. The internal
Semaphore data structures to THREADS have been corrupted.
Source:
Possible Cause:
Action:
THREADS-X-026: An internal system error has occurred. This is a special version of
THREADS with stack checking. The system stack has overflowed during a call to
THREADS by process name.
Source:
Possible Cause:
Action:
The following includes messages from THREADS.NLM.
THREADS.NLM
The THREADS.NLM program failed to set up its operating system branch
tables.
The THREADS.NLM program cannot load at this time due to memory
constraints.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
THREADS.NLM
Internal data files are corrupted.
Use a different version of this NLM program. To get a different version,
contact the vendor of this NLM program, or contact a Novell support provider.
THREADS.NLM
This NLM program uses a thread whose stack is too small.
Use a different version of this NLM program. To get a different version,
contact the vendor of this NLM program, or contact a Novell support provider.
Freeing Server Memory
Guide.
THREADS Messages 673