Novell NETWARE 6-DOCUMENTATION Manual page 3593

Possible Cause:
Action:
33: The first element of the list could not be obtained because the list is empty.
Source:
Possible Cause:
Action:
35: The current list cannot be restored with list buffer number number because the
buffer number is invalid.
Source:
Possible Cause:
Action:
36: The current list cannot be saved because the list save buffer number number is
invalid.
Source:
Possible Cause:
Action:
37: A section of memory that was previously allocated could not be freed.
Source:
Possible Cause:
Action:
642 System Messages
A hardware failure occurred.
Find out if other users and workstations are experiencing the same problem. If
so, contact a Novell support provider. If the problem persists and is isolated to
this workstation, check the hardware and cabling.
utility name in message prefix
The program expected an active list and there was none. This is a program
logic error.
Contact a Novell support provider.
utility name in message prefix
An internal system error probably has occurred.
Restart the workstation. If the problem persists, contact a Novell support
provider.
utility name in message prefix
An internal system error probably has occurred.
Restart the workstation. If the problem persists, contact a Novell support
provider.
utility name in message prefix
An internal system error probably has occurred.
Restart the workstation. If the problem persists, contact a Novell support
provider.