Novell NETWARE 6-DOCUMENTATION Manual page 3184

LOGIN-X-295: This utility could not create a context.
Source:
Explanation:
Possible Cause:
Action:
Action:
Action:
LOGIN-X-310: The workstation date and time could not be set.
Source:
Explanation:
Possible Cause:
Action:
LOGIN-X-320: An operator in the login script attempted to divide by zero.
Source:
Possible Cause:
Action:
LOGIN-X-340: IF statements are nested too deeply. The nesting limit is number levels.
Source:
Explanation:
LOGIN.EXE
LOGIN unsuccessfully tried to allocate a context handle.
Memory at the workstation might be low.
If you suspect low workstation memory, see message
does not have enough memory to load the Unicode table files." on page 781
The context for the user's name in the NET.CFG file is incorrect.
Make sure context for the user's name in the NET.CFG file is correct and try
again.
LOGIN.EXE
LOGIN could not synchronize the workstation's date or time with the server
or the eDirectory network's date or time.
An internal memory error in the workstation occurred.
Save your work and reboot the workstation. If the error persists, turn off the
workstation. Wait approximately 15 seconds, turn it on, and log in again.
LOGIN.EXE
The user did a division by zero in the login script through the DIVISION or
MODULUS arithmetic operators.
Change the login script so that it does not do a division by zero.
LOGIN.EXE
The login script can have unlimited IF statements, but the login script is
limited to number of nested IF statements indicated in the message.
Example of four levels of nested IF statements:
IF........
IF.........
IF.......
IF.....
"971: The workstation
LOGIN Messages 233