Novell NETWARE 6-DOCUMENTATION Manual page 3110

FILESYS-X-774: Invalid volume segment position of position_number of number
segments.
Source:
Possible Cause:
Action:
FILESYS-X-775: Invalid starting sector offset of number on a drive of size number.
Source:
Explanation:
Action:
FILESYS-X-776: Invalid starting sector offset of number.
Source:
Explanation:
Action:
FILESYS.NLM
The segment position is greater than the number of segments.
Run VREPAIR and restart the system.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.
FILESYS.NLM
The offset of the starting sector of a partition is greater than the size of the
partition.
Run VREPAIR and restart the system.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.
FILESYS.NLM
The offset of the starting sector is invalid. The sector is probably corrupted.
Run VREPAIR and restart the system.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.
FILESYS - File System Messages 159