Novell NETWARE 6-DOCUMENTATION Manual page 3189

LOGIN-X-580: Your password has expired and all grace logins have been used.
Source:
Possible Cause:
Action:
LOGIN-X-600: This utility could not interpret the line.
Source:
Explanation:
Action:
LOGIN-X-610: The file server does not respond.
Source:
Explanation:
Possible Cause:
Explanation:
Action:
Possible Cause:
Action:
238 System Messages
LOGIN.EXE
The account is locked because the user did not change an expired password.
The network supervisor can limit the number of times a user can log in with
an expired password.
If desired, unlock the user's account.
LOGIN.EXE
LOGIN could not parse the line indicated in the login script.
Verify that the line has been typed correctly and has the proper syntax.
LOGIN.EXE
The workstation or user tried to attach to the server, but the server did not
respond.
The server lost power or was shut off before the DOWN command was issued.
When a server is brought down, the DOWN command sends a message to all
other servers informing them that the server is no longer active. However, if a
server is shut off before the DOWN command is issued, all other servers
assume that the server is still active. In this situation, the server name still
appears when the NLIST command is invoked, even though the server is no
longer active. The server can be seen with NLIST up to 15 minutes after it has
lost its power or halts abnormally. This error message appears if the user tries
to log in to or issue a command on the server in question.
Try the command again when the server has been brought back up.
A broken or loose connection exists on the internetwork between the server
and the server the user tried to attach to.
Make sure the server is connected to the network and try to log in again.