Novell NETWARE 6-DOCUMENTATION Manual page 3523

Action:
SERVER-X-2509: The server name has NOT been set.
Source:
Explanation:
Action:
SERVER-X-2513: Protect command has an invalid file name.
Source:
Explanation:
Action:
SERVER-X-2527: Invalid station number number.
Source:
Possible Cause:
Action:
SERVER-X-2529: NLM connections CANNOT be cleared..
Source:
Explanation:
Action:
SERVER-X-2553: Illegal character character in file server name.
Source:
Possible Cause:
Action:
572 System Messages
If the Supervisor's account is still locked, you might have to run BINDFIX to
locate errors and inconsistencies that might be causing problems in the
bindery.
SERVER.EXE
No file server name was specified for the SET FILE SERVER NAME
command.
Re-execute the command and include a valid file server name.
SERVER.EXE
When you executed the PROTECT command you specified an incorrect file
name as a parameter.
Specify the correct file name as a parameter to the PROTECT command. The
file must be a .ncf file.
SERVER.EXE
The CLEAR STATION command was executed with an invalid station
number as a parameter. The station number was out of range.
Check MONITOR for a list of active station numbers and retry the command.
SERVER.EXE
A resource could not be released for some reason.
Keep trying or try to unload the NLM that's using the resource.
SERVER.EXE
When naming a file server, you included one or more unsupported characters
in the server name.
Choose a new name that does not contain illegal characters. Valid characters
are: A - Z, 0 - 9, -, _ .