Novell NETWARE 6-DOCUMENTATION Manual page 2651

Parameter
Display Lost Interrupts Threshold =
value
Display Spurious Interrupts
Threshold = value
Developer Option = value
CPU Hog Timeout Amount = value
Use to
Specify the minimum number of lost interrupts per second that
must be detected before a lost interrupt alert message will be
displayed on the system console.
Supported values: ON, OFF
Default: OFF
Note: Set Display Spurious Interrupt Alerts must also be set to
ON.
You can set this parameter in the STARTUP.NCF file.
Specify the minimum number of spurious interrupts per second
that must be detected before a spurious interrupt alert message
will be displayed on the system console.
Supported values: ON, OFF
Default: OFF
Note: Set Display Spurious Interrupt Alerts must also be set to
ON.
You can set this parameter in the STARTUP.NCF file.
Control whether options associated with a developer environment
are enabled.
Supported values: ON, OFF
Default: OFF
You can set this parameter in the STARTUP.NCF file.
Specify the amount of time in seconds to wait before terminating
a thread that has not relinquished control of the processor.
Supported values: 0 to 1 hour
Default: 1 minute
A value of 0 (zero) disables this option.
You can set this parameter in the STARTUP.NCF file.
Utilities 213