Novell NETWARE 6-DOCUMENTATION Manual page 3062

Table of Contents

Advertisement

FILESYS-X-243: Compressed file name in use by station number is corrupted and
unrecoverable.
Source:
Possible Cause:
Action:
FILESYS-X-253: Error prevented preservation of file path during file erase.
Source:
Explanation:
Possible Cause:
Action:
FILESYS-X-254: DeleteFileToLimbo failed, unable to save migrated file (path).
Source:
Possible Cause:
Action:
FILESYS.NLM
The first block of the compressed file has been corrupted on the disk. During
decompression, the integrity of the data describing the compressed file is
checked. If any of the checks fail, data corruption is assumed, and
compression cannot be completed, as is the case here. This error can only be
caused by the data changing on the disk. Changed data can result from one of
the following causes:
Magnetic or electronic media close to the disk drive
Failure of the disk drive or supporting hardware
If the disk drive is failing, other files will be corrupted and will not contain the
original data.
Try restoring the file from an earlier backup. If you cannot restore the data
from a backup, the file is lost.
FILESYS.NLM
The operating system was unable to retain the specified deleted file in a
salvageable state. The file being deleted was purged, and it cannot be
salvaged.
This message should be preceded by a message stating the actual error
condition (such as a disk-write error or out-of-memory error).
Use the message displayed before this one to determine the actual cause of and
solution for the problem.
FILESYS.NLM
An internal program error has occurred.
Retry the operation. If the problem persists, contact a Novell support provider.
FILESYS - File System Messages 111

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NETWARE 6-DOCUMENTATION and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Netware 6

Table of Contents