Novell NETWARE 6-DOCUMENTATION Manual page 3032

DSREPAIR-x-011: Stack overflow, frame size = hex number, ESP = hex number.
Source:
Possible Cause:
Action:
DSREPAIR-x-013: Could not open all of the Directory Services files.
Source:
Explanation:
Action:
DSREPAIR-x-014: Could not establish basic access to record manager.
Source:
Explanation:
Action:
DSREPAIR-x-015: Could not establish full access to record manager.
Source:
Explanation:
Action:
DSREPAIR-x-016: Volume SYS is not mounted, cannot access Directory Services
files.
Source:
Explanation:
Action:
DSREPAIR.NLM
An internal error occurred.
Try running DSREPAIR again, or reboot the server, then run DSREPAIR
again.
DSREPAIR.NLM
Four Directory database files are stored in a secure area of the NetWare
server's volume SYS. These files were found, but DSREPAIR could not
access them.
Try rebuilding the volume using REBUILD (NSS Logical volume) or
VREPAIR (Traditional volume. If this does not solve the problem, reinstall
eDirectory and restore the objects to the Directory if necessary.
DSREPAIR.NLM
A request made to the record manager of the DS.NLM program to gain control
of the database failed.
Unload then reload eDirectory. If this does not work, reboot the server and try
again.
DSREPAIR.NLM
A request made to the record manager of the DS.NLM program to gain control
of the database failed.
Unload then reload eDirectory. If this does not work, reboot the server and try
again.
DSREPAIR.NLM
The volume SYS: must be mounted to use eDirectory because it contains the
eDirectory database files.
Make sure the volume SYS: is mounted.
DSREPAIR Messages
®
81