Novell NETWARE 6-DOCUMENTATION Manual page 3371

NWCONFIG-X-438: Some NetWare disk partitions already exist on the new server
computer. NWCONFIG will delete them (including the files, user data, etc.) and create
new ones if you confirm Yes in the box that follows this message. Only NetWare (not
DOS or other) partitions on the new computer will be deleted if you confirm Yes.
WARNING: To preserve the data on existing NetWare partitions on the new computer,
confirm No.
Source:
Explanation:
Action:
NWCONFIG-X-442: A user name is required to log in to the remote server.
Source:
Explanation:
Action:
NWCONFIG-X-446: Warning: The system volume (SYS:) is not mounted, and driver
load and bind commands cannot be added to the system configuration files (and
therefore will not take effect after rebooting).
Source:
Action:
NWCONFIG-X-450: Warning: A file that is being installed would overwrite existing file
name. It probably should not be overwritten.
However, in the confirm box that follows, you may continue and overwrite this file
anyway, if you wish to.
Source:
Explanation:
Action:
420 System Messages
NWCONFIG.NLM
Make sure no data will be lost if you confirm Yes to this box. When a disk
partition is deleted, all data on that partition is lost.
If you wish to delete the partition, answer Yes. Otherwise, answer No.
NWCONFIG.NLM
Both a user name and a password are required to log in to a server.
Enter the appropriate user name.
NWCONFIG.NLM
to make sure the driver load and bind commands are added, mount the system
volume and create the .NCF files.
NWCONFIG.NLM
An existing file on the server is about to be overwritten.
Check the dates on both the existing file and new file. Determine whether the
file should be overwritten, and then answer the confirmation box accordingly.