Novell NETWARE 6-DOCUMENTATION Manual page 2787

Changing Server Message Files
30
Server Operating System Administration Guide
English is the default language for both the NetWare operating system and its
NLM programs and utilities.
You specified a language for the server when you installed it. To change the
server language later, you must first copy new language files to the server and
then set the server to the new language and restart the server as follows.
IMPORTANT:
This procedure requires you to restart the server because
executing SERVER.EXE sets the server language.
1
(Conditional) If you are copying the files from the NetWare installation
CD-ROM, insert the CD.
2
At the System Console prompt, enter
[LOAD] NWCONFIG
3
Select Product Options > Choose an Item or Product Listed Above > Add
Additional Language to the Server.
The screen displays a box containing the path from which you last
installed files. Make sure this path is to the language files. The language
files on the NetWare CD are located at
drive or volume:\NW60\INSTALL\NLS\language_id
To get a list of language IDs, enter the following at the System Console
prompt:
LANGUAGE LIST
4
If the path is correct, press Enter; if the path is incorrect, press F3 and type
in the correct path to the language files.
If you are installing the files from another server, type the path to that
server; the system might prompt you for a username and password.
Follow the prompts.
The system displays a window listing groups of language files.
5
Use the arrow keys to move the cursor to the language you want to install
and press Enter.
The system marks the selected language with an X. You can specify
several languages, if desired.
To deselect a language, move the cursor to the language and press Enter
again.