Novell NETWARE 6-DOCUMENTATION Manual page 3341

NWCONFIG-X-249: NLM_name did not finish unloading in the time allowed (number
seconds). Control will be switched to the system console screen, where you may
either see it finish or enter information to finish loading it.
Source:
Explanation:
Action:
NWCONFIG-X-250: NLM_name did not unload. Control will be switched to the system
console screen, where you may see the error.
Source:
Explanation:
Action:
NWCONFIG-X-252: Directory directory_name cannot be created. Error: description.
Source:
Explanation:
Action:
NWCONFIG-X-254: Directory name cannot be removed. Error: description.
Source:
Explanation:
Action:
NWCONFIG-X-256: NetWare path path is invalid. Specify a fixed or diskette drive path.
Source:
Explanation:
Action:
390 System Messages
NWCONFIG.NLM
The specified NLM did not unload in the time allotted. You might have to
enter information to complete the unload process.
To view the system console screen and see if an error occurred, or to enter
information, press Enter. If no error has occurred, proceed normally.
NWCONFIG.NLM
The specified NLM failed to unload.
To view the system console screen and determine what error has occurred,
press Enter.
NWCONFIG.NLM
The specified directory could not be created.
See Resolving Volume I/O Errors
Administration Guide.
NWCONFIG.NLM
The directory is in use or is not empty.
Make sure that the directory is empty before trying to remove it.
NWCONFIG.NLM
NetWare paths cannot be used for this operation.
Specify a drive path for a diskette or fixed disk.
in the Traditional File Services