Novell NETWARE 6-DOCUMENTATION Manual page 3364

NWCONFIG-X-405: No disk drivers were found by this program; it could not complete
auto mirroring.
Source:
Explanation:
Action:
NWCONFIG-X-406: This program could not find the other IO engine; it could not
complete auto mirroring.
Source:
Explanation:
Action:
NWCONFIG-X-407: An attempt by this program to allocate memory failed; auto
mirroring could not be completed.
Source:
Explanation:
Action:
NWCONFIG-X-408: This program was unable to get disk driver information; it could
not complete auto mirroring.
Source:
Explanation:
Action:
NWCONFIG-X-409: This program was unable to get partition information; it could not
complete auto mirroring.
Source:
Explanation:
NWCONFIG.NLM
The disk driver has been unloaded, or a major internal error has occurred.
Backup and reload disk drivers. If the problem persists, contact a Novell
support provider.
NWCONFIG.NLM
Communication between the two IO engines has stopped. This could be
caused by faulty network boards connecting the two computers, a break in the
communication cable, or the other computer being down.
Check the items listed above, then reboot and reinstall. If the problem persists,
contact a Novell support provider.
NWCONFIG.NLM
This program could not allocate required memory to complete auto mirroring.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
NWCONFIG.NLM
The disk driver has been unloaded or there is a major internal error.
Back up and reload disk drivers. If the problem persists, contact a Novell
support provider.
NWCONFIG.NLM
This program is no longer able to see the hard disk.
Freeing Server Memory
Guide.
NWCONFIG Messages 413