Novell NETWARE 6-DOCUMENTATION Manual page 3492

SERVER-X-587: CreateProcess called with stack size too small.
Source:
Explanation:
Possible Cause:
Action:
SERVER-X-588: CreateProcess could not allocate a process control block.
Source:
Explanation:
Possible Cause:
Action:
SERVER-X-607: ScheduleWorkToDo passed invalid resource tag.
Source:
Explanation:
Action:
SERVER-X-610, 611: Api_name was called with work to do already enqueued.
Source:
Explanation:
Action:
SERVER-X-613: Invalid line in command file.
Source:
Explanation:
Possible Cause:
Action:
SERVER.EXE
The system tried to load an NLM that allocated an inadequate amount of stack
space for itself.
The NLM is outdated or corrupted.
Try reloading the NLM from its original media and try again. If the problem
persists, contact the vendor for an updated version of the NLM.
SERVER.EXE
If this error occurs while the system is trying to load an NLM, the NLM will
not be able to load and run properly.
The system does not have enough memory to start a new process. The request
to create a new process might have been internal to the server or generated by
an NLM.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
SERVER.EXE
There could be a bug in the NLM, or the NLM might be corrupted.
Contact the NLM vendor.
SERVER.EXE
There is an internal programming error in the NLM.
Contact the NLM vendor.
SERVER.EXE
A message that was to be displayed on the screen was too long.
This problem might have occurred when this product was translated.
No further action is required.
Freeing Server Memory
Guide.
SERVER Messages 541