Novell NETWARE 6-DOCUMENTATION Manual page 3525

SERVER-X-2600: Unable to read load file header.
Source:
Explanation:
Possible Cause:
Action:
SERVER-X-2601: Unable to read version information.
Source:
Explanation:
Possible Cause:
Action:
SERVER-X-2625: Memory length must be on a paragraph boundary (i.e. number or
number).
Source:
Explanation:
Possible Cause:
Action:
SERVER-X-2628: There is no memory present at the specified address..
Source:
Explanation:
Action:
574 System Messages
SERVER.EXE
The server tried to read the NLM header but received an error. The NLM was
not loaded.
The NLM may be corrupted.
Replace the NLM with an uncorrupted version, if possible. Contact the NLM
vendor.
SERVER.EXE
The server tried to read the version of the NLM being loaded and could not.
The NLM was not loaded.
The NLM may be corrupted.
Replace the NLM with an uncorrupted version, if possible. Contact the NLM
vendor.
SERVER.EXE
The REGISTER MEMORY command could not be executed because it was
given an invalid memory length as a parameter.
The hexadecimal memory values specified as parameters to the REGISTER
MEMORY command were invalid.
See REGISTER MEMORY in Utilities Reference for instructions on
calculating the correct memory values for the command.
SERVER.EXE
Invalid parameters were passed to the REGISTER MEMORY command.
Re-execute the command with valid memory addresses. See REGISTER
MEMORY in Utilities Reference to learn how specify the hexadecimal
memory addresses required by the command.