Novell NETWARE 6-DOCUMENTATION Manual page 3079

FILESYS-X-481: Add name space aborted by the user due to insufficient disk space.
Source:
Possible Cause:
Action:
FILESYS-X-482: Add name space aborted due to insufficient server RAM.
Source:
Explanation:
Possible Cause:
Action:
FILESYS-X-483: Error allocating new entry on NameSpace upgrade...volume is left in
a bad state.
Source:
Explanation:
Possible Cause:
Action:
FILESYS-X-484: Error setting entry name on NameSpace upgrade...volume is left in a
bad state.
Source:
Explanation:
Possible Cause:
128 System Messages
FILESYS.NLM
There is insufficient disk space to add the desired name space.
Increase the available disk space on the volume. See
Space Problems in the
FILESYS.NLM
There is insufficient memory to add the desired name space.
The server might not have enough available memory.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
FILESYS.NLM
An error occurred when an ADD NAME SPACE command was issued.
The error could indicate file system corruption.
Run VREPAIR with the Remove Name Space Support from the Volume
option.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it, and restore the data from the backup.
FILESYS.NLM
An attempt to set a name space name has failed. The name space will not be
effective, and problems with other name spaces might occur.
There might not be enough disk space or system memory to handle the name
space.
Server Operating System Administration
Resolving Server Disk
Guide.
Freeing Server Memory
Guide.