Novell NETWARE 6-DOCUMENTATION Manual page 3214

MAP-X-410: The supervisor has disabled the login function for this server.
Source:
Possible Cause:
Action:
MAP-X-430: The following drive mapping operation could not be completed:
[mapping].
Source:
Explanation:
Possible Cause:
Action:
MAP-X-440: The operation was attempted on an invalid drive.
Source:
Explanation:
Possible Cause:
Action:
MAP-X-500: You do not have an account balance. This server charges for file
services.
Source:
Possible Cause:
Action:
MAP.EXE
The user account on the server is locked. The network supervisor can disable
the login function temporarily to prevent users from logging in or from
attaching to the server during system maintenance. Most likely the network
supervisor is doing maintenance work on the server.
This condition is usually temporary. Try to log in to the server after the login
function has been enabled. If the user is using CAPTURE or NPRINT, attach
to another server and use its printer.
MAP.EXE
An unexpected error occurred during a mapping attempt.
Usually this is an indication of an invalid drive being mapped or of a command
being mistyped.
Try the command again to verify that the specified drive and path exist. If this
does not work, contact a Novell support provider to get information on the
error.
MAP.EXE
The user tried to map a drive to a path that is invalid or not locatable.
The user tried to map to a local drive.
Verify the existence of the path specified and make sure that it does not map
to a local drive; then try the mapping again.
MAP.EXE
The user does not have an account on this server.
Create an account for the user or reestablish a previous account.
MAP Messages 263