Novell NETWARE 6-DOCUMENTATION Manual page 3370

Action:
NWCONFIG-X-434: Some NetWare disk partitions already exist. NWCONFIG will
delete them (including the files, user data, etc.) and create new ones if you confirm
Yes in the box that follows this message. Only NetWare (not DOS or other) partitions
will be deleted if you confirm Yes.
WARNING: To preserve the data on existing NetWare partitions, confirm No.
Source:
Action:
NWCONFIG-X-435: Warning: You had TCP/IP configured on the original server. You
will need to load INETCFG.NLM after the installation is completed, and then re-install
TCP/IP support.
Source:
Explanation:
Action:
NWCONFIG-X-436: Warning: You had APPLETALK configured on the original server.
You will need to load INETCFG.NLM after the install is completed, and then re-install
APPLETALK support.
Source:
Explanation:
Action:
the server to see the network, and the shared LAN driver allows the client to
see the network.
Load the correct sharing LAN driver. There is a line in the CONFIG.SYS file
that loads the corresponding sharing driver on the client (TOKENSHR,
TOKENLNK, or LANSHARE).
NWCONFIG.NLM
Make sure no data will be lost if you confirm Yes to this box. When a disk
partition is deleted all data on that partition is lost. If you wish to delete the
partition, answer Yes. Otherwise, answer No.
NWCONFIG.NLM
The TCP/IP installation and configuration has been changed in this version of
NetWare.
Follow the instructions in the message.
NWCONFIG.NLM
The APPLETALK installation and configuration has been changed in this
version of NetWare.
Follow the instructions in the message.
NWCONFIG Messages 419